Most boilers have instructions on the inside panel, follow these to relight the pilot light. Generally you need to hold in the reset button, keep pressed in for 10 secs and the light should stay on.
Seems simple, but this simple step can be overlooked and is sometimes all that is required.
If you have a pay-as-you go gas meter make sure there is sufficient credit
Constant water pressure is essential to the efficient functioning of your boiler system.
A number of things can cause pressure to drop. It may be that there is a leak somewhere in your boiler system. Or, if you bled your radiators recently, it may be that pressure was lost then.
Check the water pressure gauge or indicator, which is typically on the front of your boiler. For most boilers, this should be set around the 1.5 bar. The position set when the boiler was installed is sometimes shown by a red indicator needle. Each boiler will come with specific instructions about its pressure system. Check your user manual to see if you can re-pressurise your boiler yourself or alternatively click here to watch a video showing how to top up your boiler pressure. After topping up the pressure, run the hot water taps to allow water to flow through the system.
But if your boiler panel needs tools to remove it, do NOT touch it: contact our maintenance department.
Repeated drops in pressure should be reported to our maintenance department as it is a good indication that there is a problem with your boiler.
A number of things can cause pressure to drop. It may be that there is a leak somewhere in your boiler system. Or, if you bled your radiators recently, it may be that pressure was lost then.
Check the water pressure gauge or indicator, which is typically on the front of your boiler. For most boilers, this should be set around the 1.5 bar. The position set when the boiler was installed is sometimes shown by a red indicator needle. Each boiler will come with specific instructions about its pressure system. Check your user manual to see if you can re-pressurise your boiler yourself or alternatively click here to watch a video showing how to top up your boiler pressure. After topping up the pressure, run the hot water taps to allow water to flow through the system.
But if your boiler panel needs tools to remove it, do NOT touch it: contact our maintenance department.
Repeated drops in pressure should be reported to our maintenance department as it is a good indication that there is a problem with your boiler.